Erdoglija 3 – Kragujevac

Opis projekta

  • Start date: 07/07/2016
  • End date: 29/11/2017

Grading continues with the construction of buildings and apartments in Kragujevac. After the completion of the building near Y solitaire and the completion of the 1st phase, the construction of a complete block – more precisely the 2nd and 3rd phases – is planned at the given location.

At the location of Obilićeva 10, a multi-family residential building with floors B + GF + 6 floors + attic was projected. The size of the building is irregular in shape, with a gross floor area of ​​630 m2.

The building consists of two functional units:

The basement is designed as a garage with one entrance/exit ramp 5.0 m wide. In addition to parking, there is also a space designed for residents to store their things there.

Parking will also be provided on the ground floor. The residential part is designed in all higher floors. The residential part is designed so that the floor contains two studios, five 2-room and three 3-room apartments on each floor.

Inner walls between the apartments are made of reinforced concrete d=20 cm, hollow clay blocks d=20 cm and sandwich walls d= 9 cm + 2 cm + 9 cm (hollow clay block + Azmafon sound insulation + hollow clay block). The walls inside the apartment are made of hollow clay block d=12 cm. The walls are plastered with plaster d=2 cm. They are smoothed and painted with semi-dispersion paint with all the necessary pre-treatments (Protection of critical places in the walls from cracks). In the sanitary rooms, the walls are covered with 1st class full-height ceramic tiles. The walls in the kitchens are covered with ceramic tiles from the floor to a height of 1.50 m. 

Facade walls are made of reinforced concrete d=20 cm and hollow clay blocks d=20 cm. AB. walls are covered with stone wool and styrofoam d=12 cm which serves as thermal insulation, and then on the entire surface of the facade is applied silicate silicone facade.

Ceilings – The mezzanine ceiling of reinforced concrete d=20 cm has been treated with 2 cm thick plastering, smoothing and painting with semi-dispersion paint with all the necessary pre-treatments.

Floors – In all rooms and communications, floors are designed according to the principle of “floating” floor on a layer of thermal insulation material and appropriate layers of hydro isolation materials. The floors of the entrance and common rooms on the higher floors are made of ceramic tiles, while the living space is covered with ceramic tiles and laminate flooring.

Thermal insulation – Facade thermal insulation is made of stone wool and Styrofoam d=12 cm. On the first floor, the insulation of the apartments is d = 10 + 5 = 15 cm. On the attic ceiling, thermal insulation made of stone wool brand d=30 cm is projected, while on the ground floor ceiling is projected the same thermal insulation of d= 10 cm.

Hydro isolation – Hydro isolation has been designed in the building, which with its technical characteristics enables protection against penetration of moisture and water into the building, ie insulation of draining, capillary and water under pressure. In the bathrooms and on the terraces, double waterproofing is performed (on concrete + on a leveling layer). Drainage has been installed around the basement of the building.

Hydro isolation – There is hydro isolation designed in the building and it – with its technical characteristics – enables protection against the penetration of moisture and water into the building, i.e., insulation of draining, capillary water, and water under pressure. There is double hydro isolation in the bathrooms and on the terraces (on concrete + on a leveling layer). Drainage has been installed around the basement of the building.

The sound insulation – The mezzanine structure is covered with stone wool d=2 cm + Azmafon sound insulation d=1 cm.

Elevator – The building has two noiseless electric passenger elevators, load capacity Q = 630kg.

Heating – Heating is central, connected to the city heating plant. Each apartment has a calorimeter, as well as thermostatic heads on the radiators, thus enabling complete cost control.

Inner door – The door frame is made of solid pine wood. The wing is made of a wooden frame, double plywood and the filling is made of kraft honeycomb. The door is covered with white MDF

Entrance door for apartments – The door frame is made of wood. The door wings consist of: plywood filling d=44 m, covered with MDF d=6 mm veneered in oak veneer. The door wing has two rubber seals, behind the door frame there is Azmafon sound insulation so that the door meets all the requirements related to acoustics. The mechanism of the door is fitted with a lock mechanism, a lock with 5 locking points, 4 hinges, decorative-protective holders, an aluminum handle and a spyhole.

Windows – The single-wing facade windows are made of plastic profiles with steel girders, and according to the manufacturer’s system they are in white. The windows are glazed with three-layer low-emission glass with glass d= 4 + 12 + 4 + 12 + 4 mm and they open around the horizontal and vertical axis. All windows are fitted with neoprene rubber sealing tape around the entire circumference.

Doors – Single-wing balcony doors are made of plastic profiles with steel girders, and according to the manufacturer’s system they are in white. The door is glazed with three-layer low-emission glass d= 4 + 12 + 4 + 12 + 4 mm. The doors open around a horizontal and vertical axis.

Video surveillance – The video surveillance system enables 24-hour control of the entrance hall of the building, garage, elevators and the yard of the building. Each apartment has an intercom device.

Find your dream home.

Start